Ferrite-size dry-pressed table

 

 

Code Dimensional Description
01 D8 (+/-0.2) X 2 (+/-0.2)
02 D9 (+/-0.15) X 5 (+/-0.15)
03 D9 (+/-0.2) X 3 (+/-0.2)
04 D12.7 (+/-0.25) X d4.75 (+/-0.25) X 3.175 (+/-0.12)
05 D12 (+0/-0.3) X 3 (+/-0.2)
06 D13.2 (+0/-0.027) X d5.6 (+/-0.2) X 3 (+/-0.1)
07 D13.6 (+/-0.02) X d4 (+0.1/-0) X 3 (+/-0.02)
08 D13 (+/-0.05) X d5 (+/-0.25) X 3.5 (+/-0.2)
09 D13 (+/-0.2) X d9 (+/-0.15) X 4 (+/-0.2)
10 D14.5 (+/-0.3) X d10.5 (+/-0.2) X 2.5 (+/-0.2)
11 D14.7 (+0/-0.3) X 3.5 (+/-0.15)
12 D14 (+0.2/-0.1) X d3.5 (+/-0.1) X 4 (+/-0.1)
13 D15.8 (+/-0.2) X d11.3 (+/-0.2) X 3 (+/-0.2)
14 D15 (+0/-0.3) X 3 (+/-0.2)
15 D15 X 4 both sides are vaulted
16 D16 (+0.4/-0) X d11.5 (+0.2/-0.1) X 2.5 (+/-0.1)
17 D16 X 4
18 D17 (+/-0.34) X 5.3 (+/-0.2)
19 D18 (+0.01/-0.025) X d4 (+0.1/-0.2) X 6.5 (+/-0.2)
20 D18 (+0/-0.5) X 3 (+/-0.1)
21 D18 (+/-0.015) X d12 (+/-0.3) X 5 (+0/-0.4)
22 D18 (+/-0.05) X d4.88 (+0.3/-0) X 2 (+0/-0.05)
23 D18 X d6 X 3.5 one side is vaulted
24 D19.5 (+0/-0.5 X 3 (+/-0.1)
25 D19.6 (+0/-0.03) X d12(+0.5/-0) X 7.5 (+0/-0.03)
26 D19.8 (+/-0.15) X 3 (+/-0.1)
27 D20 (+0.1/-0.4) X d8 (+0.4/-0) X 5 (+/-0.2)
28 D22 (+/-0.44) X 3 (+/-0.2)
29 D23 (+/-0.3) X d6.5 (+/-0.2) X 5(+/-0.2)
30 D24.8 (+0/-0.4) X 3.5 (+/-0.15)
31 D2.5 (+/-0.15) X 3 (+/-0.2)
32 D25 (+0/-0.5) X 3 (+/-0.2)
33 D29.8 (+0/-0.5) X 5 (+/-0.15)
34 D30 (+/-0.6) X 3 (+/-0.2)
35 D31.75 X d17 X 5
36 D45.644 X d31.8 X 22.86
37 D5.2 (+0.1/-0) X 2.5 (+0.1/-0)
Dimensions, shapes, tolerances other than herein stated can be supplied after discussion.
Block
Code  Dimensional Description
01 F5.08 (+0.12/-0) X 5.08 (+0.12/-0) X 5.97 (+/-0.05)
02 F8 (+/-0.2) X 10 (+/-0.2) X 12 (+/-0.24)
03 F9 (+/-0.2) X 9 (+/-0.2) X 39 (+/-0.8)
04 F11 X 9.9 X 2 X 5 sector shape
05 F15 (+/-0.2) X 11 (+/-0.2) X 5 (+0.25/-0.05)
06 F16.9 (+0/-0.6) X 9.6 (+0/-0.6) X 4.9 (+/-0.05)
07 F18 (+/-0.36) X 15 (+/-0.24) X 4 (+/-0.2)
08 F19.7 (+0/-0.4) X 14.1 (+0/-0.4) X d4 (+/-0.2) X3.4 (+0/-0.3)
09 F19 X 6.5 X 3 X d2.7
10 F20 (+/-0.25) X 11 (+/-0.2) X 6 (+0.25/-0)
11 F23.5 (+/-0.4) X 13.5 (+/-0.3) X d4.8 (+/-0.3) X 4.8 (+/-0.2)
12 F23.7 X 13.7 X d4.35 X 4.85
13 F23 (+/-0.3) X 13 (+/-0.2) X d5 (+0.3/-0) X 5 (+/-0.2)
14 F24 (+0/-0.6) X 14 (+0/-0.6) X d4.5 (+0/-0.3) X 5 (+0/-0.3)
15 F25.4 (+/-0.5) X 19.05 (+/-0.38) X d4.76 (+/-0.2) X 4.5 (+/-0.2)
16 F26 (+/-0.52) X 23.5 (+/-0.45) X 4.5 (+/-0.2)
17 F29.8 X 11.9 X 5
18 F29 (+/-0.58) X 11 (+/-0.22) X 3 (+/-0.2)
19 F30 (+0.1/-0.5) X 11 (+0.1/-0.3) X 6 (+0.1/-0.3)
20 F30 (+/-0.6) X 19 (+/-0.8) X 3 (+/-0.1)
21 F33 (+/-0.66) X 17 (+/-0.34) X 4 (+/-0.2)
22 F37.5 (+/-0.75) X11.5 (+/-0.23) X 7 (+/-0.2)    ( with 4 square holes)
23 F40 (+0/-0.6) X 10 (+/-0.2) X 4 (+/-0.2)

 

 

Dimensions, tolerances other than herein stated can be supplied after discussion.